One of our major product ranges is our selection of labjacks. These are manufactured to very fine tolerances from aluminium and stainless steel. The nature of the design makes the labjack extremely stable and very robust. The labjacks are generally anodised blue, but can now be anodised in a variety of colours. These are illustrated on our New Product page along with details of the sizes available.

 

We produce a wide range of clamps in a variety of styles and finishes. The smaller types will hold articles up to 90mm with the larger industrial clamps being capable of holding larger items.

 

Many different types of burners are available for use with natural, lpg and coal gas. The burner range includes Bunsen Teclu, Meker and Micro burners together with a range of blowlamps. All burners are 100% tested for flame quality and leakage prior to packing.

 

A large range of bossheads are manufactured varying from the basic diecast alloy through to bossheads constructed entirely out of stainless steel. Most bossheads will accept rods upto 16mm diameter, with a number able to accept larger diameters.

 

Various types of rods and bases are produced, the main sizes of rods varying from 500-1000mm long with an M10 thread. These are manufactured from mild steel, zinc plated steel, aluminium and stainless steel. Other sizes can be produced on request. Five sizes of rectangular base are produced in mild steel with different finishes, these being blue acrylic, white acrylic or vitreous enamel. We also manufacture spread bases, "A" shape bases and "H" shape bases. A number of tripods are also manufactured in zinc plated or stainless steel, along with a comprehensive range of retort rings.
13mm Bunsen Burner 4006/2TC Nat gas ref.
13 mm Teclu Burner 4010/2TC Nat gas ref.
24mm Meker Burner 4101/22TC Nat gas ref.

(In all cases available for natural, coal and LP gases). Can now be supplied with a flame failure device that shuts off the gas supply to the burner within 20 seconds of the flame being extinguished. The safety features are all contained within the burner - an electrical supply from either mains or battery is therefore not required. The moving parts i.e. the actuator and thermocouple can be replaced, although exhaustive tests have not yet caused a failure. However, in the event of damage, we recommend that repairs are carried out in our factory to ensure that the burner is properly adjusted and operates correctly.

Ref...
Burner only 4083
Burner with 220gm cartridge 4083/1
Gas cartridge only 4083/2

Designed for use with Colmans Butane / Propane mix gas cartridge. This burner can achieve temperatures in excess of 1000°c. The design of the gas cartridge enables the burner to be detached and re-attached as often as needed making it easily stored and transported.

It is entirely constructed in brass with a replaceable plated steel perforated head. When used with the 220gm cartridge the burner fits the standard 8" (200mm high tripod. Typical burning time of the 220gm cartridge is 2.3/4 hours.r is properly adjusted and operates correctly.

Ref.
Coal gas 9011
Natural gas 9013
LPG 9012
Spare glass tube 1070

Stainless steel scaffold foot 2117/1
Stainless steel bosshead (with thumb screws) 2001
Stainless steel bosshead (with allen screws) 2001/1
Stainless steel clamp 2122
Scaffold tubing with plastic end caps 2121/-3 Range
- any length available, standard sizes are:
Size Ref
1000mm 2121/13
250mm 2121/33
1500mm 2121/43
1800mm 2121/53

 

Ref Size Colour
2041 50x40cm Green (not illustrated)
2038 100x100cm Blue
9037 140x120cm Pink
2035 150x150cm Gold
2036 200x200cm Turquoise
2040 200x230cm Blue (not illustrated)
2042 320x260cm Silver

 

 

laboratory metalware, laboratory equipment, precision engineering, repetition turned parts, cnc turning, cnc milling, bunsen burners, retort stands