|
We have now added our complete
fused silica and Ultra-ALLOY stainless steel column price
lists. The lists are sorted by I.D. then column length.
The columns listed are those
that are commonly requested by our customers. If you do not
see the column configuration you require, CONTACT
US, we will
be happy to quote.
|
HARDWARE
|
| SRI Portable GCs
Full featured
lab-quality portable GCs with many standard injector
and detector options. Peaksimple Data
Acquisition software, purge and traps, autosamplers,
thermal desorbers, and stand-alone detectors are
also available. We
may already have the GC you need with the line of
popular preconfigured "turn-key" GC
systems. These GCs offer just about everything a
full-sized major brand GC has to offer, but at half
the cost!
Gas Generator Systems
High
purity gas generators for Nitrogen, Hydrogen and
Zero-Air gases. Various output levels are
available which are suitable for many analytical and
industrial applications. The
Gas Generator Systems from Peak Scientific will
improve laboratory safety, reduce your time and
effort used in changing cylinders and will save you
money. These Gas Generator Systems produce greater
stability and repeatability, eliminate cylinder to
cylinder variations, and allow you to run your
instruments 24 hours a day with safety and
confidence. High purity systems are available for GC
applications, high output systems are available for
LC/MS applications, and other industrial
applications where purity and consistent output are
critical. Includes a full one year warranty!
|
GC
CONSUMABLES
Ferrules/Fittings/Injector LinersCarrier
Gas Traps/Septa/Syringes and more...
|
HIGH
PURITY
GAS
GENERATOR SYSTEMS
THE
SAFE AND COST EFFECTIVE
ALTERNATIVE TO USING CYLINDER GASES
|
|
HYDROGEN,
NITROGEN AND ZERO-AIR GENERATORS
FOR GC, LC, AND OTHER INDUSTRIAL
APPLICATIONS |
- Greater
safety and convenience
- Eliminate
dangerous cylinders
- H2
Generator not subject to contaminant
regulations
- Greater
stability and repeatability
- Eliminate
cylinder to cylinder variations
- Cost
effective with usually 1 year pay back
- Ideal
for mobile applications
- Available
in 110V and 220V systems
|
Gas
Generator Systems from Peak Scientific will
improve laboratory safety, reduce your time
and effort used in changing cylinders and
will save you money. There will be fewer
problems with column bleed, detector
response, baseline noise and drift, and
fewer ghost peaks which will increase the
productivity from your instruments. These
Gas Generator Systems produce greater
stability and repeatability, eliminate
cylinder to cylinder variations, and allow
you to run your instruments 24 hours a day
with safety and confidence. Includes a full
one year warranty!
All Generator Systems include an integral
air compressor (where applicable), have
1/4" output fittings (hydrogen has
1/8" fittings), and are available in
110V and 220V systems. Other output levels
are available - please inquire. |
NITROGEN
GENERATORS |
HYDROGEN
GENERATORS |
ZERO
AIR
GENERATORS |
| >99.9995%
consistent purity |
>99.9999%
consistent purity |
Air
< 0.1ppm THC |
| Safe
operation |
Dual
redundancy safety system |
Consistent
results |
| Continuous
flow |
H2
produced only on demand |
Compact
design |
| Built-in
air compressor |
Microprocessor
controlled |
Built
in air compressor |
| Installed
in minutes |
Internal
and external leak detection |
Easy
to install |
| Saves
money and space |
Visible
and audible alarms |
Low
maintenance |
| Patented
technology |
No
handling of caustic solutions |
Increases
productivity |
| |
Patented
technology |
|
HIGH PURITY NITROGEN GENERATORS for GC
and other industrial applications: The Peak
Nitrogen Generators use highly efficient
Carbon Molecular Sieve adsorbent to produce a
continuous supply of ultra high purity (UHP)
nitrogen. As compressed air is fed across the
molecular sieve bed, oxygen, moisture,
hydrocarbons and other trace gases are trapped
while the UHP nitrogen flows freely to the
outlet port. Uninterrupted flow is assured due
to the self-regenerating, maintenance free
Carbon Molecular Sieve. All purities at
99.9995%. Maximum output pressure is 80psi.
Outlet port is 1/4". Pressure dew point
is –70°C/-100°F. |
NITROGEN
GENERATORS for GC
|
|
HIGH
OUTPUT NITROGEN GENERATORS for LC/MS
and other industrial applications: The Peak
High Output Nitrogen Generators use hollow
fiber membrane technology to efficiently
separate nitrogen from other gases in air to
produce a continuous high flow supply of high
purity nitrogen for use in LC/MS systems using
either APCi or ESi modes. The Peak Nitrogen
Generators are easy to use, install in
minutes, come with a built-in filtration
system and with or without the built-in air
compressor.
Nitrogen output up to 30 liters per minute at
99.9% purity. Maximum output pressure is
100psi. Outlet port is 1/4". Pressure dew
point is –70°C/-94°F.
Recommended and used with:
Applied Biosystems/MDS Sciex, Finnigan/Thermoquest,
LECO, Micromass, Waters, H-P & Shimadzu
LC/MS systems. |
NITROGEN
GENERATORS for LC/MS |
|
| HYDROGEN
GENERATORS for GC
and other industrial applications:
The HG Series Hydrogen Generators are the
ideal alternative dangerous and expensive gas
cylinders in your laboratory. Use the Peak
Hydrogen Generator for your GC's FID flame
source, carrier gas, or your HALL detector's
reaction gas. All purities at 99.9999%.
Adjustable delivery pressure 0 – 100psi.
Outlet port is 1/8". Pressure dew point
is –70°C/-100°F. |
HYDROGEN
GENERATORS for GC |
|
ZERO AIR GENERATORS for GC
and other industrial applications- The ZA
Series Air Generators produce high purity zero
air (CH4 < 0.1ppm) and produces gas
equivalent to UHP zero air cylinders at a
fraction of the cost. Outlet hydrocarbon
concentration (as methane) is < 0.1ppm.
Maximum inlet pressure is 125psi. Start-up
time for minimum hydrocarbon levels is 30
minutes. |
ZERO-AIR
GENERATORS |
 |
|
